-
No image available
Recall Details
| October 2, 2006 Alert #07-501 |
Scubapro® Recalls MK 20 Scuba Regulators for Service
The following product safety recall was voluntarily conducted by the firm in cooperation with the CPSC. Consumers should stop using recalled products immediately unless otherwise instructed. It is illegal to resell or attempt to resell a recalled consumer product.
Name of Product: Scubapro® MK 20 First Stage Regulators
Units: About 48,500 units.
Manufacturer: Scubapro® USA, of El Cajon, Calif.
Hazard: Over-tightening of the Yoke or Din retainer during annual servicing of these regulators could result in a stress crack and failure of the regulator. If this occurs during a dive, air supply could be interrupted, posing a drowning hazard.
Incidents/Injuries: No injuries or underwater incidents have been reported. Scubapro® USA has received eight reports of units that failed after being serviced.
Description: The recall involves first stage regulators that are marked with the Scubapro brand and identified as the MK20.
Sold at: Authorized Scubapro® dealers nationwide from January 1996 through December 2001 for about $260.
Manufactured in: Italy and United States.
Remedy: Scubapro® USA has been providing a service upgrade kit via the authorized dealer network since May 2005 which contains a Yoke or Din retainer that prohibits over-tightening during annual service. Consumers can easily identify if the service upgrade has been completed by counting the vents on the plastic saddle located on the regulator. If the service upgrade has not been completed, the consumer should bring the regulator to any authorized Scubapro® dealer to have the service upgrade completed free of charge.
Consumer Contact: For assistance in locating the nearest authorized Scubapro® dealer or for more information, contact Scubapro® USA toll-free at (800) 731-6685 between 8 a.m. and 5 p.m. PT Monday through Friday, or go to the firm's Web site at www.scubapro-uwatec.com
Note: Individual Commissioners may have statements related to this topic. Please visit www.cpsc.gov/commissioners to search for statements related to this or other topics.
Related Recalls
The recalled Poseidon M28A Dive Computers can stop working due to intake of water causing a malfunctioning depth sensor resulting in a loss of dive data for the diver, posing an injury hazard.
The handle for the weight pockets in the Scuba Diving Buoyancy Compensating Device can break during use. If this happens, the user will not be able to dump weight pockets in an emergency to rise to the surface, posing a drowning hazard.
A defective screw on the turret connection can break, posing a risk of severe injury and drowning hazard for divers.
The compressor head of the tankless diving system can fracture while in use resulting in restricted air flow, posing a drowning hazard for divers.
Defective metal fittings on the inflator hose can cause an airflow restriction and failure to inflate, or improper inflation of the BCD, posing a drowning hazard to the user.
The scuba diving regulators can malfunction, posing a drowning hazard.
The U.S. Consumer Product Safety Commission (CPSC) is charged with protecting the public from unreasonable risk of injury or death associated with the use of thousands of types of consumer products. Deaths, injuries, and property damage from consumer product-related incidents cost the nation more than $1 trillion annually. CPSC's work to ensure the safety of consumer products has contributed to a decline in the rate of injuries associated with consumer products over the past 50 years.
Federal law prohibits any person from selling products subject to a Commission ordered recall or a voluntary recall undertaken in consultation with the CPSC.
- Visit CPSC.gov.
- Sign up to receive our email alerts.
- Follow us on Facebook, Instagram @USCPSC and Twitter @USCPSC.
- Report a dangerous product or product-related injury on www.SaferProducts.gov.
- Call CPSC’s Hotline at 800-638-2772 (TTY 800-638-8270).
- Contact a media specialist.
