A yellow cap left on during the manufacturing process can cover one of the two smoke sensors and compromise the smoke alarm’s ability to detect smoke, posing a risk of consumers not being alerted to a fire in their home.
Kidde toll-free at 833-551-7739 from 8:30 a.m. to 5 p.m. ET Monday through Friday, from 9 a.m.to 3 p.m. on Saturday and Sunday, or online at www.kidde.com and click on “Product Safety Recall” for more information.
Recall Details
This recall involves models PI2010 and PI9010 of Kidde dual sensor (photoelectric and ionization) smoke alarms. “KIDDE” is printed on the front center of the smoke alarm. The model number and date code are printed on the back of the alarm.
|
Model |
Date Code |
|
PI9010 (DC/battery powered) |
2016 Sep. 10 through 2017 Oct. 13 |
|
PI2010 (AC/hardwired) |
2016 Sep. 10 through 2017 Oct. 13 |
Consumers should remove the alarm from the wall/ceiling and visually inspect it through the opening on the side of the alarm for the presence of a yellow cap. Consumers should not attempt to take apart the alarm, open the casing, or otherwise remove the yellow cap themselves. If a yellow cap is present, the consumer should immediately contact Kidde to receive instructions and request a free replacement smoke alarm. They should remove and discard the recalled smoke alarm only after they receive and install the replacement alarm. If no yellow cap is present, consumers should reinstall the smoke alarm and no further action is needed.
The firm has received one report of the yellow protective cap being present on a smoke alarm before it was installed in a consumer’s home. No reports of incidents or injuries as a result of a yellow cap being present have been reported.
Walter Kidde Portable Equipment Company Inc., of Mebane, N.C.
Note: Individual Commissioners may have statements related to this topic. Please visit www.cpsc.gov/commissioners to search for statements related to this or other topics.
Related Recalls
The crimp holding a wire in place in the cabinet heater is not properly finished and can result in the wire detaching, posing an electrocution hazard.
The fan can malfunction and fail to turn on causing the unit to overheat and ignite internally, posing a fire hazard.
The recalled AirJet and HydroJet spa pumps can overheat causing the plastic housing to ignite, posing a fire hazard.
The lithium-ion batteries in the HALO 1000 Portable Power Station can overheat, posing fire and burn hazards that can lead to serious injury or death.
An interior connection in the recalled Siemens SolarReady Meter Combos can overheat, posing a fire hazard.
The recalled area rugs violate the mandatory federal flammability regulations for carpets and rugs, posing a fire hazard.
The U.S. Consumer Product Safety Commission (CPSC) is charged with protecting the public from unreasonable risk of injury or death associated with the use of thousands of types of consumer products. Deaths, injuries, and property damage from consumer product-related incidents cost the nation more than $1 trillion annually. CPSC's work to ensure the safety of consumer products has contributed to a decline in the rate of injuries associated with consumer products over the past 50 years.
Federal law prohibits any person from selling products subject to a Commission ordered recall or a voluntary recall undertaken in consultation with the CPSC.
- Visit CPSC.gov.
- Sign up to receive our email alerts.
- Follow us on Facebook, Instagram @USCPSC and Twitter @USCPSC.
- Report a dangerous product or product-related injury on www.SaferProducts.gov.
- Call CPSC’s Hotline at 800-638-2772 (TTY 800-638-8270).
- Contact a media specialist.
