The driveside crankarm can disengage and cause the rider to lose control, posing fall and injury hazards.
Authorized Specialized Retailer or Specialized Bicycle Components toll-free at 877-808-8154 from 8 a.m. to 6 p.m. PT Monday through Friday, email ridercare@specialized.com or online at www.specialized.com and click on “Safety Notices” for more information.
Recall Details
This recall involves Specialized Fuse Comp and Fatboy SE bicycles with Stout cranks.
The bikes come in Gloss Hyper/Black Clean and Satin Gloss Black/Rocket Red for Fuse Comp and Gloss Warm Charcoal/Black/Gallardo Orange and Satin Oak Green/Blac/Rocket Red for Fatboy SE. Only cranks with “STOUT” written on either crankarm and equipped with a direct-mount chainring manufactured in 2017 are affected. Cranks are manufactured in 2017 if the serial code imprinted on the inside of either crankarm starts with “17.”
Consumers should immediately stop using the recalled bicycles with stout cranks and contact an Authorized Specialized Retailer for instructions on how to receive a free replacement crankarm.
None reported
Specialized Bicycle Components, Inc., of Morgan Hill, Calif.
Note: Individual Commissioners may have statements related to this topic. Please visit www.cpsc.gov/commissioners to search for statements related to this or other topics.
Related Recalls
The space between the rotating platform and the stationary outer rim can leave a gap that narrows too much, posing a crushing hazard to children.
The pop-pin can fail to fully engage in the exercise equipment’s vertical rail and cause the pulley carriage to drop unexpectedly during use, posing an impact injury hazard to users.
The battery compartment within the avalanche transceiver could not have enough contact force to supply power. In some cases, the transceiver will fail to power on or cease operating during use. It would make it impossible to locate a victim in an avalanche emergency situation, which could result in serious injury or death.
The positive (+) battery terminal cover (red) can become damaged by the seat base, causing the positive (+) battery post to be exposed and contact nearby conductive components, resulting in an electrical short, posing a fire hazard.
The vehicles’ passenger side seat belt anchor point can separate from the frame due to a defective weld on the bracket, posing an injury hazard to passengers from impact with a loose bracket or failure of the seatbelt during a crash.
The mechanical internal locking plates can fail to align and allow unauthorized users to open the gun safes, posing a serious injury hazard and risk of death.
The U.S. Consumer Product Safety Commission (CPSC) is charged with protecting the public from unreasonable risk of injury or death associated with the use of thousands of types of consumer products. Deaths, injuries, and property damage from consumer product-related incidents cost the nation more than $1 trillion annually. CPSC's work to ensure the safety of consumer products has contributed to a decline in the rate of injuries associated with consumer products over the past 50 years.
Federal law prohibits any person from selling products subject to a Commission ordered recall or a voluntary recall undertaken in consultation with the CPSC.
- Visit CPSC.gov.
- Sign up to receive our email alerts.
- Follow us on Facebook, Instagram @USCPSC and Twitter @USCPSC.
- Report a dangerous product or product-related injury on www.SaferProducts.gov.
- Call CPSC’s Hotline at 800-638-2772 (TTY 800-638-8270).
- Contact a media specialist.
