Skip to main content

Siemens Announces Free I-T-E Circuit Breaker Box Inspection Program

Name of Product:
ITE circuit-breaker boxes, or "load centers"
Hazard:

Some of the circuit-breaker boxes were manufactured using components of an incorrect material, which could cause overheating and malfunction.

Remedy:
Inspect
Recall Date:
November 01, 1988
Consumer Contact

Consumers may call Siemens at 1-800-241-3138 to arrange for free professional inspection of the unit.

Recall Details

Description:

WASHINGTON, DC - In cooperation with the U.S. Consumer Product Safety Commission, the Circuit Protection Division of Siemens Energy & Automation, Inc. of Alpharetta, Georgia is voluntarily offering free inspection and correction of certain of its I-T-E brand circuit-breaker boxes (load centers) installed between September 1986 and May 1987.

Siemens is extending a program begun in November 1986 when it discovered that some of the circuit-breaker boxes were manufactured using components of an incorrect material, which could cause overheating and malfunction.

The involved ITE circuit-breaker boxes, or "load centers," can be identified by a five-digit code marked on the top of the wiring diagram label inside the door which is opened to reset the circuit breakers. The specific date codes involved are as follows:

  • H2586-H3186 (H = August, days 25 through 31, 86 = year)
  • J0186-J3086 (J = September, days 1 through 30, 86 = year)
  • K0186-K2486 (K = October, days 1 through 24, 86 = year)
  • Example: A product manufactured on September 24, 1986 bears the code J2486.

Anyone locating such a load center which does not have an "inspected lugs" sticker should call Siemens at 1-800-241-3138 to arrange for free professional inspection of the unit. If the wiring diagram label has an "inspected lugs" stamp, the load center has already been inspected and corrected if necessary.

Remedy:

Anyone locating such a load center which does not have an "inspected lugs" sticker should call Siemens at 1-800-241-3138 to arrange for free professional inspection of the unit. If the wiring diagram label has an "inspected lugs" stamp, the load center has already been inspected and corrected if necessary.

Recall number:
88-091

请注意:各位委员会委员对相关题目可能会发表声明。请访问www.cpsc.gov/commissioners搜寻这一或其它题目的相关声明。

If you are experiencing issues with a recall remedy or believe a company is being non-responsive to your remedy request, please use this form and explain the situation to CPSC.
About the U.S. CPSC

The U.S. Consumer Product Safety Commission (CPSC) is charged with protecting the public from unreasonable risk of injury or death associated with the use of thousands of types of consumer products. Deaths, injuries, and property damage from consumer product-related incidents cost the nation more than $1 trillion annually. CPSC's work to ensure the safety of consumer products has contributed to a decline in the rate of injuries associated with consumer products over the past 50 years.

Federal law prohibits any person from selling products subject to a Commission ordered recall or a voluntary recall undertaken in consultation with the CPSC.

For lifesaving information:
Choose Your Recall Emails Get Notified About Each Recall via Email.
Report an unsafe product