-
No image available
Recall Details
|
FOR IMMEDIATE RELEASE |
|
|
July 29, 1977 |
|
|
Release # 77-081 |
WASHINGTON, D.C. (July 29)-- Master Lock Company, Milwaukee, Wisconsin, in cooperation with the U.S. Consumer Product Safety Commission (CPSC), today announced a voluntary recall of approximately 32,000 "Master" number 2551 battery-operated smoke alarms and number 2553 dual-powered smoke alarms made late in 1975 and during part of 1976.
The recalled smoke alarms can be identified by the following range of serial numbers: 1 to 10,000; 17,735 to 20,000 and 2,000,001 to 2,020,000. The serial number is located on the back cover of the smoke alarm under the mounting bracket.
Some of the units may fail to alarm when the relative humidity is over 70% in the home because they were inadequately cleansed of soldering flux after initial assembly. Other units may not be sensitive enough to alarm at minimum smoke levels set by industry standards. The company has received one complaint from a consumer who noticed an alarm did not function properly during a routine test.
Consumers who own a "Master" smoke alarm with a serial number that falls within the range of 1 to 10,000; 17,735 to 20,000 or 2,000,00l to 2,020,000 are asked to write: Master Lock Company, 2600 N. 32nd Street, Milwaukee, Wisconsin 53210, Attention: Department #16, including their name, address, telephone and serial number of the alarm.
The company will promptly send the consumer a form detailing full return instructions. The units will either be replaced or corrected, depending on the problem, without cost to the consumer.
Consumers who require additional information should write to the company.
Note: Individual Commissioners may have statements related to this topic. Please visit www.cpsc.gov/commissioners to search for statements related to this or other topics.
Related Recalls
The sounders and strobes can malfunction and cause the fire alarm system to fail to alert consumers of a fire.
The smoke alarm and the combination smoke/carbon monoxide (CO) alarm can fail to alert consumers to a fire.
The smoke alarms can have a misaligned internal switch causing the alarms to not activate properly, posing a risk of failure to alert consumers to a fire.
The photoelectric smoke sensor can malfunction and cause the fire alarm system to fail to alert occupants in commercial buildings of a fire.
A yellow cap left on during the manufacturing process can cover one of the two smoke sensors and compromise the smoke alarm’s ability to detect smoke, posing a risk of consumers not being alerted to a fire in their home.
The smoke detectors connected to the gateway can fail to activate properly when significant environmental contaminants are present, posing a risk that consumers will not be alerted to a fire.
The U.S. Consumer Product Safety Commission (CPSC) is charged with protecting the public from unreasonable risk of injury or death associated with the use of thousands of types of consumer products. Deaths, injuries, and property damage from consumer product-related incidents cost the nation more than $1 trillion annually. CPSC's work to ensure the safety of consumer products has contributed to a decline in the rate of injuries associated with consumer products over the past 50 years.
Federal law prohibits any person from selling products subject to a Commission ordered recall or a voluntary recall undertaken in consultation with the CPSC.
- Visit CPSC.gov.
- Sign up to receive our e-mail alerts.
- Follow us on Facebook, Instagram @USCPSC and Twitter @USCPSC.
- Report a dangerous product or product-related injury on www.SaferProducts.gov.
- Call CPSC’s Hotline at 800-638-2772 (TTY 301-595-7054).
- Contact a media specialist.
