[Federal Register Volume 77, Number 19 (Monday, January 30, 2012)]
[Notices]
[Pages 4544-4545]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2012-1931]
=======================================================================
-----------------------------------------------------------------------
CONSUMER PRODUCT SAFETY COMMISSION
[CPSC Docket No. CPSC-2012-0008]
CPSC Symposium on Phthalates Screening and Testing Methods
AGENCY: Consumer Product Safety Commission.
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: The Consumer Product Safety Commission (``CPSC,''
``Commission,'' or ``we'') is announcing its intent to hold a symposium
on phthalates screening and testing methods. The symposium will be held
at the CPSC's National Product Testing and Evaluation Center in
Rockville, Maryland, on March 1, 2012. We invite interested parties to
participate in or attend the symposium and to submit comments.
DATES: The symposium will be held from 10 a.m. to 3 p.m. on March 1,
2012. Individuals interested in serving on panels or presenting
information at the symposium should register by February 9, 2012; all
other individuals who wish to attend the symposium should register by
February 24, 2012. Comments must be received by February 27, 2012.
ADDRESSES: The symposium will be held at the CPSC's National Product
Testing and Evaluation Center, 5 Research Place, Rockville, Maryland
20850. There is no charge to attend the symposium. Persons interested
in serving on a panel, presenting information, or attending the
symposium should register online at: http://www.cpsc.gov/meetingsignup.html, and click on the link titled, ``Phthalates Testing
Symposium.'' More information about the symposium will be posted at
www.cpsc.gov/about/cpsia/phthalatestest.html.
You may submit comments, identified by Docket No. CPSC-2012-0008,
by any of the following methods:
Electronic Submissions
Submit electronic comments in the following way:
Federal eRulemaking Portal: http://www.regulations.gov. Follow the
instructions for submitting comments.
To ensure timely processing of comments, the Commission is no
longer accepting comments submitted by electronic mail (email) except
through: http://www.regulations.gov.
Written Submissions
Submit written submissions in the following way:
Mail/Hand delivery/Courier (for paper, disk, or CD-ROM
submissions), preferably in five copies, to: Office of the Secretary,
Consumer Product Safety Commission, Room 820, 4330 East West Highway,
Bethesda, MD 20814; telephone (301) 504-7923.
Instructions: All submissions received must include the agency name
and docket number for this notice. All comments received may be posted
without change, including any personal identifiers, contact
information, or other personal information provided, to: http://www.regulations.gov. Do not submit confidential business information,
trade secret information, or other sensitive or protected information
electronically. Such information should be submitted in writing.
Docket: For access to the docket to read background documents or
comments received, go to: http://www.regulations.gov.
FOR FURTHER INFORMATION CONTACT: Matthew Dreyfus, Ph.D., Directorate
for Laboratory Sciences, 5 Research Place, Rockville, MD 20850, (301)
987-2094, mdreyfus@cpsc.gov.
SUPPLEMENTARY INFORMATION:
I. What does the law require?
Section 108 of the Consumer Product Safety Improvement Act of 2008
(CPSIA) (Pub. L. 110-314) permanently prohibits the sale of any
``children's toy or child care article'' containing more than 0.1
percent of each of three specified phthalates: di-(2-ethylhexyl)
phthalate (DEHP), dibutyl phthalate (DBP), and benzyl butyl phthalate
(BBP). Section 108 of the CPSIA also prohibits on an interim basis, the
sale of any ``children's toy that can be placed in a child's mouth'' or
``child care article'' containing more than 0.1 percent of each of
three additional phthalates: diisononyl phthalate (DINP), diisodecyl
phthalate (DIDP), and di-n-octyl phthalate (DNOP).
Section 14(a)(2) of the Consumer Product Safety Act (CPSA) (15
U.S.C. 2063(a)(2)) establishes testing requirements for children's
products that are subject to a children's product safety rule. (Section
3(a)(2) of the CPSA (15 U.S.C. 2052(a)(2)) defines a ``children's
product'' as a consumer product designed or intended primarily for
children 12 and younger.) Section 14(a)(2)(A) of the CPSA also states
that, before a children's product that is subject to a children's
product safety rule is imported for consumption or warehousing or
distributed in commerce, the manufacturer or private labeler of such
children's product must submit sufficient samples of the children's
product, ``or samples that are identical in all material respects to
the product,'' to an accredited ``third party conformity assessment
body'' to be tested for compliance with the children's product safety
rule. Based on such testing, the manufacturer or private labeler, under
section 14(a)(2)(B) of the CPSA, must issue a certificate that
certifies that such children's product complied with the children's
product safety rule based on the assessment of a third party conformity
assessment body accredited and CPSC-approved to perform such tests.
In the Federal Register of August 10, 2011 (76 FR 49286), we
published a notice of requirements establishing the accreditation
criteria for third party conformity assessment bodies to assess
[[Page 4545]]
conformity with the limits on phthalates in children's toys and child
care articles. The notice of requirements described the test methods
that third party conformity assessment bodies should use when testing
for phthalates. In brief, the test methods identified in the notice of
requirements are:
CPSC-CH-C1001-09.3, Standard Operating Procedure for
Determination of Phthalates, issued on April 1, 2010. This test method
can be downloaded from the CPSC Web site at: http://www.cpsc.gov/about/cpsia/CPSC-CH-C1001-09.3.pdf; and/or
GB/T 22048-2008, Toys and Children's Products--
Determination of Phthalate Plasticizers in Polyvinyl Chloride Plastic,
issued on June 16, 2008. Information about this method is available at:
http://220.194.5.109/stdlinfo/servlet/com.sac.sacQuery.GjbzcxDetailServlet?std_code=GB/T%2022048-2008.
Thus, third party conformity assessment bodies use either of the
two test methods identified immediately above when they test children's
toys and child care articles for compliance with the phthalates limits.
II. What do we hope the symposium will accomplish?
The CPSIA's phthalate restrictions, coupled with the testing and
certification requirements in the CPSA, have created certain challenges
for manufacturers, retailers, and third party conformity assessment
bodies (more commonly known as ``testing laboratories''). Therefore, we
intend to hold the first CPSC Symposium on Phthalates Screening and
Testing Methods on March 1, 2012, at our National Product Testing and
Evaluation Center, located at 5 Research Place, Rockville, Maryland
20850. The symposium will run from 10 a.m. to 3 p.m.
Our goal is to review available and emerging technologies for
detecting phthalates and to stimulate discussion of technological needs
to improve testing methods. We intend to ensure that the advantages and
limitations of screening and testing methods are discussed. We plan to
use a combination of technical presentations and discussion panels to
explore these issues at the symposium.
III. What topics will be addressed at the symposium?
We plan to cover the following topics:
Methods for increased quality control, from the
manufacturing process to testing a final product;
Available chemical analysis instrumentation and
techniques, including infrared spectroscopy (FTIR), Thermal Desorption,
Direct Analysis Real Time Mass Spectrometry (DART-MS), and Gas
Chromatography/Mass Spectrometry (GC/MS);
Advantages and limitations of available technology; and
Emerging organic chemical detection and quantification
technologies.
We will prepare a detailed agenda based on scheduled presenters and
expected attendance, and we will make the agenda available on our Web
site at: www.cpsc.gov/about/cpsia/phthalatetestagenda.pdf.
IV. Details Regarding the Symposium
A. When and where will the symposium be held?
The symposium will be held from 10 a.m. to 3 p.m. on March 1, 2012,
at the CPSC's National Product Testing and Evaluation Center, 5
Research Place, Rockville, Maryland 20850.
B. How do you register for the symposium?
If you would like to make a presentation at the symposium or to be
considered as a panel member for a specific topic or topics, you should
register by February 9, 2012. (See the ADDRESSES portion of this
document for the Web site link and instructions on where to register.)
We also ask that you indicate whether you would like to serve on a
panel or make a presentation, and indicate the topic(s) for which you
wish to be considered. We ask that you limit the number of topics to no
more than three. We will select panelists and individuals who will make
presentations at the symposium, based on considerations such as the
individual's familiarity or expertise with the topic to be discussed;
the practical utility of the information to be presented (such as a
discussion of specific methods), and the individual's viewpoint or
ability to represent certain interests (such as large manufacturers,
small manufacturers, consumer organizations).
In addition, please inform Dr. Matthew Dreyfus, mdreyfus@cpsc.gov,
(301) 987-2094 of any special equipment needs required to make a
presentation. While an effort will be made to accommodate all persons
who wish to make a presentation, the time allotted for presentations
will depend on the number of persons who wish to speak on a given topic
and the agenda. We recommend that individuals and organizations with
common interests consolidate or coordinate their presentations and
request time for a joint presentation. If you wish to make a
presentation and want to make copies of your presentation or other
handouts available, you should bring copies to the symposium. We will
notify those who are selected to make a presentation or participate in
a session or panel at least two weeks before the symposium. Selections
will be made in attempt to ensure that a wide variety of interests are
represented.
If you do not wish to make a presentation, we ask that you register
by February 24, 2012. Please be aware that seating will be on a first-
come, first-served basis. If you are unable to attend the symposium, it
will be available through a webcast, but you may not be able to
interact with the panels and presenters.
If you need special accommodations because of disability, please
contact Dr. Matthew Dreyfus, mdreyfus@cpsc.gov, (301) 987-2094 at least
10 days before the symposium.
In addition, we encourage written or electronic comments to the
docket. Written or electronic comments will be accepted until February
27, 2012. Please note that all comments should be restricted to the
topics covered by the symposium.
C. What happens if few people register for the symposium?
If fewer than 15 individuals register for the symposium, we may
cancel the symposium. If we decide to cancel the symposium, we will
post a cancellation notice by February 23, 2012, on the Web page for
the symposium insert web address and send an email to all registered
participants who provide their email address when they register.
Dated: January 25, 2012.
Todd A. Stevenson,
Secretary, Consumer Product Safety Commission.
[FR Doc. 2012-1931 Filed 1-27-12; 8:45 am]
BILLING CODE 6355-01-P