[Federal Register Volume 76, Number 93 (Friday, May 13, 2011)]
[Rules and Regulations]
[Page 27882]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: C1-2011-9421]


=======================================================================
-----------------------------------------------------------------------

CONSUMER PRODUCT SAFETY COMMISSION

16 CFR Part 1217

RIN 3041-AC79


Safety Standard for Toddler Beds

Correction

    In rule document 2011-9421 beginning on page 22019 in the issue of 
Wednesday, April 20, 2011, make the following correction:


Sec.  1217.2  [Corrected]

    On page 22029, in Sec.  1217.2(c)(6), at the bottom of the page, 
insert Sec. Sec.  1217.2(c)(6)(iii), 1217.2(c)(6)(iv), and 
1217.2(c)(7), which should read:
    (iii) 8.4.4 Toddler beds that convert from a full-size crib, also 
known as convertible cribs, must meet the warning requirements 
specified in section 8 of ASTM F 1169-10, instead of the requirements 
of 8.4.3. See 16 CFR Part 1219 for complete requirements for full-size 
cribs.
    (iv) 8.4.5 Any toddler bed that can convert from a full-size crib, 
and has the warning specified in section 8.1.3 of ASTM F 1169-10, must 
include additional text at the end of that warning that specifies the 
minimum mattress thickness of 4 inches (100 mm). See 16 CFR Part 1219 
for complete requirements for full-size cribs.
    (7) In addition to figure 10 of ASTM F 1821-09, use the following:

[FR Doc. C1-2011-9421 Filed 5-12-11; 8:45 am]
BILLING CODE 1505-01-D