[Federal Register: February 22, 2010 (Volume 75, Number 34)]
[Rules and Regulations]
[Page 7550-7551]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr22fe10-4]
=======================================================================
-----------------------------------------------------------------------
CONSUMER PRODUCT SAFETY COMMISSION
16 CFR Part 1130
Requirements for Consumer Registration of Durable Infant or
Toddler Products; Correction
AGENCY: Consumer Product Safety Commission.
ACTION: Final rule; correction.
-----------------------------------------------------------------------
SUMMARY: The Consumer Product Safety Commission (``Commission'') is
correcting a final rule that appeared in the Federal Register of
December 29, 2009 (74 FR 68668). The document issued a final rule under
section 104(d) of the Consumer Product Safety Improvement Act of 2008
(``CPSIA'') requiring manufacturers of durable infant or toddler
products to establish and maintain a system for consumers to register
their products with the manufacturer.
DATES: The correction will become effective on June 28, 2010.
FOR FURTHER INFORMATION CONTACT: Marc Schoem, Deputy Director, Office
of
[[Page 7551]]
Compliance and Field Operations, Consumer Product Safety Commission,
4330 East-West Highway, Bethesda, MD 20814; telephone (301) 504-7520;
mschoem@cpsc.gov.
SUPPLEMENTARY INFORMATION: In FR Doc. E9-30485 appearing on page 68668
in the Federal Register of Tuesday, December 29, 2009, there was a
discrepancy between the text describing the registration form and the
figures illustrating the form. The regulatory text reversed the
location of information on the bottom of the form. To address this, the
following corrections are made:
Sec. 1130.6 [Corrected]
1. On page 68677, in the first and second columns, in Sec. 1130.6,
in paragraph (b)(3), ``The bottom front panel shall have blocks for the
consumer to provide his/her contact information as required in Sec.
1130.7(c).'' is corrected to read ``The bottom back panel of the form
shall have blocks for the consumer to provide his/her contact
information as required in Sec. 1130.7(c).''
2. On page 68677, in the second column, in Sec. 1130.6, in
paragraph (b)(3), ``The back of the bottom portion of the form shall be
pre-addressed and postage-paid with the manufacturer's name and mailing
address where registration information is to be collected.'' is
corrected to read ``The front of the bottom portion of the form shall
be pre-addressed and postage-paid with the manufacturer's name and
mailing address where registration information is to be collected.''
Dated: February 16, 2010.
Todd Stevenson,
Secretary, U.S. Consumer Product Safety Commission.
[FR Doc. 2010-3297 Filed 2-19-10; 8:45 am]
BILLING CODE 6355-01-P